Best Paver Restoration Tips for Longer Life

Best paver restoration tips for longer life

Brick pavers are a fantastic value upgrade for any property; they are becoming prevalent amongst homeowners. Pavers can give your home or driveway a million-dollar look.

There are a few problems that come with owning pavers. Pavers require a lot of attention and care over their life; they need to be cleaned on a regular schedule; if left uncared for, they can crack and lose the color they once had. Repairing pavers can become very costly. That is why you want to restore them before they are too far gone, and having to replace them will be your only option.

The best way to restore pavers is to clean them; this is generally done with pressure washing and some bleach to help remove the organic growth on the brick's surface. Treatment options also depend on the problem; if it's just dirt and green on the surface, then some bleach and light pressure will clean these up very well. If the pavers haven't been cared for and are five years or older, they may be faded from years of UV Ray exposure. Putting chemicals on a faded paver will not bring the color back out of them. If the bricks are faded, this will require something called a color additive; this is done by spraying a liquid onto the paver and bring the color back out of it. Adding color is something that can be done during a paver sealing process if it's needed.

For any paver restoration job, the best thing to do is clean the surface with bleach and pressure, remove all the dirt algae from the body, and blast the cracks to remove all the old dirty sand.

Once the cleaning process is over, you should resend the joints to help stabilize the pavers, so they don't shift and crack. The best type of sand for sanding pavers is polymeric sand, which can be found at most home depot lows or a local hardware store. That type of sand will help fight against the weeds growing between the cracks of the pavers. The sanding process can be a challenging job; one easy way is to spread the sand all over the bricks and use a house to direct the sand into the cracks.

Wet sanding the sand into the cracks is a lot less back-breaking than sweeping the sand into the cracks. Once you see that all cracks are filled with the sand and there is excellent coverage, you need to grab a leaf blower and blow the excess sand off the surface. A lot of time, this is where people would stop and say the pavers are cleaned and resanded, and now they're done. For the best protection for the pavers after sanding, they should be sealed.

Paver sealing will seal the sand into the cracks to stop the sand from escaping the cracks and lowering the paver shifting and cracking risk. A paver sealer will also give those excellent clean paver restoration jobs a nice new wet sheen to them. Paver sealing also helps prevent oil spills from cars or even cooking grease and sunscreen from seeping into the concrete's pores. For the perfect paver restoration job, make sure to clean well, resend, and then have the pavers sealed with a water-based sealer. Paver sealing should be done by a sealing professional if done wrong, pavers can be permanently ruined and will have to be replaced.

Contact Us

If you’re looking for a Tampa area pressure washing contractor for paver sealing, then please call 813-703-2817, or complete our online request form.